Applications

ProGlove partners with DyeMansion to commercialize wearable 3D printed smart scanner

Barcode scanner manufacturer ProGlove has partnered with post-processing specialist DyeMansion to enter the series production of its latest wearable device. 

Using DyeMansion’s POWERSHOT systems, the company has been able to create products with a more premium finish, including a fluorescent brand-matching color. The long-term partnership has also enabled ProGlove to ramp-up the production of its new MARK Display scanner, and the firms are already working on its next product launch. 

“In the beginning, the parts were spray-painted afterwards, but the color faded during use,” explained Konstantin Brunnbauer, VP of Production at ProGlove. “With PolyShot Surfacing we have superior surfaces. I think it’s perceived as a premium compared to some of the injection molded parts.”

“The collaboration helped us to trust in this technology, and to find the right way to design it in a way that we can use it.” 

ProGlove’s industry 4.0 devices 

Founded in 2014 and based in Munich, ProGlove manufactures its ‘MARK’ scanning devices and ‘Insight’ software range, which are designed to make smart wearables as user-friendly as possible. The firm’s products have often found automotive applications, and its previous clients include Audi, Volkswagen and Seat

Initially, ProGlove used FDM 3D printing to create prototypes, but established that it wasn’t sufficient for producing functional devices. Switching to SLS, meanwhile, provided the firm with greater design freedom and the ability to print complex parts, but they still couldn’t match the quality provided by injection molding. 

In particular, ProGlove was concerned about only being able to 3D print the devices in a white color and spray-paint them into different shades. After persistent use, the company noticed that its prototypes began to become discolored, and it sought a production solution that would allow it to consistently create high-quality products. 

Partnering with DyeMansion enabled ProGlove to produce parts with a scratch-resistant finish. Photo via ProGlove.
Partnering with DyeMansion enabled ProGlove to 3D print parts with a premium scratch-resistant finish. Photo via ProGlove.

3D printing high-quality scanners

To overcome these teething issues, ProGlove outsourced the printing process to service provider FORMRISE, which proved capable of repeatably producing the devices. The firm then partnered with DyeMansion to help finish its products, and found that clients preferred the Polyshot-treated parts over injection molded ones. 

As a result, ProGlove revised its post-processing setup, switching to the POWERSHOT machines for cleaning and surfacing, before using a DM60 system to apply coloring. Utilizing the ‘Print-to-Product’ process, the firm is now able to make its latest scanners with its customary orange motif, a vital part of its brand identity. 

“When it comes to color, the white parts would have been a no-go. We wanted to have this orange lighting signal,” explained Brunnbauer. “When we first started dyeing with the DyeMansion DM60 it was the standard orange. DyeMansion has undertaken some color development, and now it is our ‘ProGlove Orange.’”

As a relatively new company, ProGlove intends to release fresh product iterations on a yearly basis, and using 3D printing, it’s been able to shorten its innovation cycle. Consequently, although the firm is currently scaling the launch of its new Display scanner, it’s already working with DyeMansion on new additions to its portfolio. 

The proliferation of post-processing 

Post-processing is becoming as important as 3D printing itself when it comes to creating high-quality parts, and recognizing this trend, several firms have now developed their own dedicated machines. 

US-based SLA 3D printer manufacturer Nexa3D launched its xCure post-processing system in October 2020. The company’s new machine, which is reportedly capable of curing parts on a “production scale,” has been optimized for use with its flagship NXE400 3D printer. 

Austrian 3D printer producer Genera also released a new post-processing unit last year called the ‘F2’. Once connected to the company’s G2 printer, the machine’s shuttle system is able to transport parts between them automatically, preventing the need for any manual handling. 

Elsewhere, LuxYours has obtained a patent for the Iterative Flux Smoothing (IFS) technology featured within its LUXMatic 700 post-processing system. The firm’s technology effectively combines several chambers into a closed volume, where 3D printed parts can be both pre-conditioned separately and smoothed together

To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on Twitter or liking our page on Facebook.

Are you looking for a job in the additive manufacturing industry? Visit 3D Printing Jobs for a selection of roles in the industry.

Featured image shows ProGlove’s latest MARK Display 3D printed wearable scanner. Photo via ProGlove.