Where is AI unlocking advantages? Explore what is possible at AMA: Software 2026.
The Applied Science and Technology Research Organization of America (ASTRO America) has entered a Cooperative Research and Development Agreement (CRADA) with Northrop Grumman, Florida State University InSPIRE, and the Air Force Research Laboratory (AFRL) Air Warfare Directorate’s Mission Effects Division (AFRL/RAB). The collaborative investment totals nearly $9 million.
The partners will use additive manufacturing (AM) and other advanced techniques to reduce the cost and time involved in building munitions. The broader aim is to make the U.S. defense industrial base more resilient.
ASTRO America is a nonprofit research institute and think tank founded in 2018. It supports collaborations between government agencies and companies that address supply chain challenges in highly regulated industries, including aerospace and defense.
DART Program Focuses on Subsonic Munitions
The agreement sets up the Design for Affordable and Rapid Throughput (DART) initiative. Under DART, the partners will assess, develop, and implement manufacturing technologies to demonstrate affordable, high-throughput fabrication of subsonic munitions.
The program seeks to lower the expense of producing and qualifying adaptable missile bodies and their components. Processes named in the announcement include additive solid-state deposition, powder bed fusion, novel casting, and subtractive methods.
Gray Wolf Missile Selected for DART
These processes will be applied to the Gray Wolf missile system, which Northrop Grumman developed with the AFRL Munitions Directorate, since renamed the Air Warfare Directorate. The system was designed around minimizing per-unit cost. Its open architecture accommodates a range of payloads and can be carried on multiple U.S. Air Force and U.S. Navy platforms.
Results from the Gray Wolf work may inform approaches for other munition systems.

A New Lab Near Eglin Air Force Base
Work will take place in a new laboratory near Eglin Air Force Base in Northwest Florida, with technical support from FSU InSPIRE. ASTRO will coordinate with InSPIRE on the evaluation of materials and subsystems through mechanical, thermal, and aerodynamic testing.
“ASTRO would not have brought this partnership to Northwest Florida without the steadfast support of Florida State University and the transformative investment from Triumph Gulf Coast in InSPIRE,” said Dr. Abdalla R. Nassar, Vice President and General Manager, ASTRO South. He added that the effort is also intended to drive regional economic growth.
“Industry today is under extreme pressure to produce better products faster while de-risking innovation,” said Drew Allen, Executive Director of FSU InSPIRE. He credited ASTRO’s guidance with jump-starting InSPIRE’s advanced manufacturing capabilities, allowing research to move quickly through production and rigorous testing.
Cutting Cost and Lead Time in Missile Manufacturing
DART targets two costs in missile programs: producing each structure and qualifying it for use.
CoAspire and Divergent Technologies used 3D printing to design and build the Rapidly Adaptable Affordable Cruise Missile (RAACM), developed under contract with the U.S. Air Force. Removing conventional tooling from assembly cut labor and production costs. The first fuselages, wings, and fins were delivered within 10 weeks, and the missile completed a flight test within 14 weeks. Both efforts target the cost and lead time of missile structures developed with the Air Force. RAACM, however, was designed using 3D printing, while DART adapts a mix of processes to a missile that already exists.
On the propulsion side, Ursa Major used its Lynx technology to build a solid rocket motor (SRM) with Raytheon Technologies that completed flight tests for the U.S. Army. Lynx combines metal 3D printing with product-agnostic tooling so several SRMs can be fabricated together on one production line. Conventional SRM production, by contrast, is hard to re-tool, expensive to ramp up, and reliant on large workforces. This effort shares DART’s focus on cost and volume in munitions, but it applies to motors, while DART covers missile bodies and their components.
Across these efforts, AM is being applied to both missile structures and propulsion as U.S. defense programs look to lower munitions costs.
What should you automate next? Get ideas at AMA: Software 2026. Join 3D Printing Industry on 22 October for expert presentations, panel discussions and live audience Q&A exploring the software shaping additive manufacturing. Register here.
To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on LinkedIn.
Explore the full Future of 3D Printing and Executive Survey series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the industrialization of additive manufacturing, 3D printing industry trends 2026, qualification, supply chains, and additive manufacturing industry analysis.
Featured image shows ASTRO America Logo. Image via ASTRO America.






